Page 1 of 5
How to connect pyspades to our master server
Posted: Tue Dec 11, 2012 4:00 pm
by izzy
Live servers connected to
our master server are listed here:
http://www.buildandshoot.com/serverlist ... p?master=1
If you're using PySnip you don't need to do anything - your server will connect to our master server by default.
Please follow these instructions to connect your
pyspades server to our master server:
- If you use the pre-built feature server you must replace run.exe from the PySnip feature server.
- If you built from source:
- Open ~/pyspades/master.py
- Find:
- Replace with:
- Restart the server
Re: How to connect pyspades to our master server
Posted: Wed Dec 12, 2012 9:22 am
by sidex15
why is my server is says server connection failed why? :oops:
Re: How to connect pyspades to our master server
Posted: Wed Dec 12, 2012 9:36 am
by StackOverflow
sidex15 wrote:why is my server is says server connection failed why? :oops:
Are you using pysnip or pyspades?
Re: How to connect pyspades to our master server
Posted: Wed Dec 12, 2012 9:50 am
by sidex15
StackOverflow wrote:sidex15 wrote:why is my server is says server connection failed why? :oops:
Are you using pysnip or pyspades?
pysnip
Re: How to connect pyspades to our master server
Posted: Wed Dec 12, 2012 9:56 am
by StackOverflow
Can you pastebin your recent server log ?
Re: How to connect pyspades to our master server
Posted: Wed Dec 12, 2012 10:24 am
by sidex15
StackOverflow wrote:Can you pastebin your recent server log ?
I dont know
Re: How to connect pyspades to our master server
Posted: Wed Dec 12, 2012 10:30 am
by StackOverflow
Go into your pysnip installation folder, then open the "logs" directory. Inside you'll find a file called "log.txt". Open it, copy it's contents and then go to
http://pastebin.com. Paste the copied log there, submit it and then post the pastebin URL here.
Re: How to connect pyspades to our master server
Posted: Wed Dec 12, 2012 12:57 pm
by milono
Nice!!!
It works but...
My server don't have people. I see the most servers haven't got people in it. So ok thanks, now Ace Of Spades 0.75 will survive. And **** Jagex i am sorry for swearing, but I am angry)! :D :oops:
Thanks,
milono123 :blue: :green:
Re: How to connect pyspades to our master server
Posted: Thu Dec 13, 2012 10:33 am
by sidex15
StackOverflow wrote:Go into your pysnip installation folder, then open the "logs" directory. Inside you'll find a file called "log.txt". Open it, copy it's contents and then go to http://pastebin.com. Paste the copied log there, submit it and then post the pastebin URL here.
ok
http://pastebin.com/rvWek8CP
Re: How to connect pyspades to our master server
Posted: Thu Dec 13, 2012 12:24 pm
by StackOverflow
sidex15 wrote:StackOverflow wrote:Go into your pysnip installation folder, then open the "logs" directory. Inside you'll find a file called "log.txt". Open it, copy it's contents and then go to http://pastebin.com. Paste the copied log there, submit it and then post the pastebin URL here.
ok http://pastebin.com/rvWek8CP
There doesn't seem to be any problems with your server connecting to the master server.
Do you mean you're getting an error when trying to join the server?
Re: How to connect pyspades to our master server
Posted: Thu Dec 13, 2012 2:18 pm
by trn227
Help!! i got the same problem when i join a server the loading bar is not moving and when i wait a few minutes then the error pop out and say... (error server disconnect) pls help me!!pls :(
Re: How to connect pyspades to our master server
Posted: Thu Dec 13, 2012 2:25 pm
by milono
Hi all i got this message - Master connection could not be established, reconnecting in 60 seconds. I downloaded pysnip and do everything! Please help! 8-)
Re: How to connect pyspades to our master server
Posted: Thu Dec 13, 2012 9:00 pm
by milono
Freakin' quietly...
Re: How to connect pyspades to our master server
Posted: Fri Dec 14, 2012 8:01 am
by sidex15
StackOverflow wrote:sidex15 wrote:StackOverflow wrote:Go into your pysnip installation folder, then open the "logs" directory. Inside you'll find a file called "log.txt". Open it, copy it's contents and then go to http://pastebin.com. Paste the copied log there, submit it and then post the pastebin URL here.
ok http://pastebin.com/rvWek8CP
There doesn't seem to be any problems with your server connecting to the master server.
Do you mean you're getting an error when trying to join the server?
yes please help
Re: How to connect pyspades to our master server
Posted: Fri Dec 14, 2012 10:38 am
by StackOverflow
milono wrote:Hi all i got this message - Master connection could not be established, reconnecting in 60 seconds. I downloaded pysnip and do everything! Please help! 8-)
Chances are that was me, I was tweaking some stuff with the master server yesterday.
sidex15 wrote:StackOverflow wrote:
There doesn't seem to be any problems with your server connecting to the master server.
Do you mean you're getting an error when trying to join the server?
yes please help
Seems like you probably need to do something like open ports on your router.